Does anyone have any suggestions or tips on installing the off road x-pipe?
how long of extentions will i need to get the h-pipe off the stock headers and how do i install the mil eliminators, do i take the plugs off the rear o2 sensors and take the plug off the wiring harness that goes to the computer and stick my steeda mil eliminators in between them?
Use 1/2" drive, 1x 5" 1x12" and a swivel socket for best results. I'd use a breaker bar not a ratchet though. the passenger side can be a real sumbich sometimes. Big time elbow grease. Mils have to go between your O2's and the the harness FWIR. Unplug O2's and remove (so you don't busticate them pulling the pipe out).unbolt and remove/let swing cat-backunbolt H pipe from headersremovereinstall in reverse order.
Linear Mode
